Model 2500

gearmotorsLamination - PQ
Housings - Zinc & Aluminum Cast End with Steel Center Housing
Bearings - Ball
Brush Structure - External
Cord or Leads
Mounting - Face
Rotation - C.W., C.C.W., Reversible
Shaft Diameter - .375 - .4375 - .500
Shaft Extension - Single or Double
Ventilation - Totally Enclosed or Open Ventilated
Voltage - 115 to 230 (For Other Voltages Consult Factory)
Winding - Series or Shunt
Thermal Protection Available

gearmotors

2500A
2500B
2500C
R.P.M
OZ. IN.
H.P.
OZ. IN.
H.P.
OZ. IN.
H.P.
10000 50 .500 75 .750 100 1.000
7500 50 .375 75 .562 100 .750
5000 50 .250 75 .375 100 .500

Motor Ratings- Continuous duty open ventilated.

Greater horsepower ratings are available for intermittent duty applications if the duty cycle is such that on and off periods allow the gearmotors to stay within the temperature rise limit of the insulation system.

Motor Specialty Inc. has been building gearmotors to customer specification since 1947. Gearmotors can be designed using any one of our base product models.

MODELS [660] [700] [1000] [2500] [2900] [3100] [Ring-Roller] [Armatures/Field Sets] [Home]

Motor Specialty Inc.
2801-17 Lathrop Avenue • P.O. Drawer 081278 • Racine, WI 53408
Tel.: 262-632-2794 • Fax: 262-632-8899
E-Mail: sales@motorspecialty.com • Web: www.motorspecialty.com

custom motors | ac motors | electric motors | worm gear reducers | gearmotors | dc motors | permanent magnet motors | specialty motors

©2002 Motor Specialty Inc.